JOB OPPORTUNITIES:

The machine has an output that varies from 60 to 80 links per minute and works with a thread of 1.80 to 4 mm. in diameter.
Splices fixed axis with automatic locking plug and opening in two stages. Front cam movement to prevent excessive thread causes a user of this.
Plates aligned automatically with a remote mobile group and independent parking brake adjustable tip link.
Decks exchanged independent of the plates and registration possibilities in the vertical and lateral.
Safety device, thus avoiding damage to the whole, in the case of accidents involving falling chain, which block the machine.
With machine TCK, as with all automatic machines for chain, we must act very carefully to get good performance and best performance. Before starting the machine, we have to test it is always necessary that the movements of the cams will happen in time with accuracy and verify that the various screws are very well secured. The slightest slip can cause consequences for the smooth operation of controls and even the integrity of the whole.

Before starting any adjustment of the machine, it is essential to separately control each of the parts of the machine, ie the brake, Cam, veneers, mallets, clamps,

Lubricate and often during the day all parties to the movements of the machine. It is recommended using SAE-40.